Re: Broken Universal & Rescue (l

From: Jim Paugh (James.Paugh@Eng.Sun.COM-DeleteThis)
Date: Wed Jun 14 1995 - 14:11:45 PDT 

Received: from hplms26.hpl.hp.com by opus.hpl.hp.com with SMTP (1.37.109.8/15.5+ECS 3.3+HPL1.1) id AA03446; Wed, 14 Jun 1995 14:21:42 -0700
Return-Path: <James.Paugh@Eng.Sun.COM-DeleteThis>
Received: from venus.Sun.COM by hplms26.hpl.hp.com with ESMTP ($Revision: 1.36.108.11 $/15.5+ECS 3.3+HPL1.1S) id AA075204902; Wed, 14 Jun 1995 14:21:43 -0700
Received: from Eng.Sun.COM by venus.Sun.COM (Sun.COM) id OAA22791; Wed, 14 Jun 1995 14:11:27 -0700
Received: from jurassic.Eng.Sun.COM (jurassic-98.Eng.Sun.COM) by Eng.Sun.COM (5.x/SMI-5.3) id AA22951; Wed, 14 Jun 1995 14:11:24 -0700
Received: from jalama.Eng.Sun.COM by jurassic.Eng.Sun.COM (SMI-8.6/SMI-SVR4) id OAA15392; Wed, 14 Jun 1995 14:11:21 -0700
Received: by jalama.Eng.Sun.COM (SMI-8.6.9/SMI-SVR4) id OAA04541; Wed, 14 Jun 1995 14:11:45 -0700
Date: Wed, 14 Jun 1995 14:11:45 -0700
From: James.Paugh@Eng.Sun.COM-DeleteThis (Jim Paugh)
Message-Id: <199506142111.OAA04541@jalama.Eng.Sun.COM-DeleteThis>
To: wind_talk@opus.hpl.hp.com-DeleteThis
Subject: Re: Broken Universal & Rescue (l
X-Sun-Charset: US-ASCII

No, most use an 8mm bolt, both into the universal and into the mast track
(at least for slotted mast tracks).

~Jim

> From Bill.Lide@ncal.kaiperm.org-DeleteThis Wed Jun 14 14:00:59 1995
> Date: Wed, 14 Jun 1995 13:57:24 -0700
> Originator: wind_talk@opus.hpl.hp.com-DeleteThis
> From: Bill.Lide@ncal.kaiperm.org-DeleteThis
> To: Multiple recipients of list <wind_talk@opus.hpl.hp.com-DeleteThis>
> Subject: Re: Broken Universal & Rescue (l
> X-Listprocessor-Version: 6.0c -- ListProcessor by Anastasios Kotsikonas
> X-Comment: Windsurfing Discussion Mailing List
>
> >>Since that I don't trust any universal pin that is less than 1/2''.
>
> Don't all the stainless steel pins narrow down to 1/4" to thread into the
> bottom of the universal joint itself?
>
> The pin I broke off 3rd Avenue was 1/2" in its exposed part, but became 1/4"
> in the hidden part that threaded into the bottom of the universal.
>
> Bill
>

This archive was generated by hypermail 2b29 : Mon Dec 10 2001 - 02:29:25 PST